Panasonic H-55LFV60U Operating Instructions Manual

Contents

Panasonic H-55LFV60U Operating Instructions Manual Manual pdf 65 page image

65English[Normal]:Switches to the backup input if an interruption ofvideo occurs.The backup video signal does not need to be in thesame format as the (main) input in use for viewing.Upon switching to the backup input, the video andaudio adjustment values for the backup input willbe used.■ Backup input (Quick)Promptly switches to the backup input if aninterruption of video occurs, and enables switchingbetween digital (HDMI1 / HDMI2 / DVI-D) inputs.Note● The backup video signal needs to be in the sameformat as the (main) input in use for viewing.● Upon switching to the backup input, the video andaudio adjustment values for the (main) input used forviewing will be inherited.[Primary backup input]Sets the first priority backup input.(None) / [HDMI1] / [HDMI2] / [DVI-D]The input that is of the same type as the one in usefor viewing will be greyed out.[Secondary backup input]Sets the second priority backup input.(None) / [HDMI1] / [HDMI2] / [DVI-D]The input that is of the same type as the one in usefor viewing will be greyed out.[Auto switch back mode]Sets whether or not to automatically return to theformer (main) input when the former input videoinitially viewed is restored while viewing the videoof the backup input enabled by the operation of theBackup Input function.[Disable]:Unreturned[Enable]:Returned[Changing mode]Select speed of input switching.[High speed]:If switching between the same signal formats, it ispossible to switch within 1 second.If switching between the different signal formats,picture noise is caused.[Normal speed]:If switching between the same signal formats, it ispossible to switch within 2 seconds.If switching between the different signal formats, ittakes 3 to 4 seconds to switch but picture noise isnot caused.[Backup input change]Displays whether or not operating conditions for theBackup Input function are met.[Inactive]:Indicates that the conditions are not met, andinactivates the Backup Input function.[Active]:Indicates that the conditions are met, and activatesthe Backup Input function.[Main input]Displays the (main) input initially used for viewing.[Current input]Displays whether the input currently in use for viewingis the (main) input initially used for viewing or thebackup one.Setting conditionsThe following table describes restrictions (availablecombinations) on each setting item.MainHDMI1HDMI2DVI-DPCCOMPONENT*VIDEOUSBBackupHDMI1HDMI2DVI-D○ × ×PCCOMPONENT*VIDEO× × ×USB × × ×○: Selectable for both Primary and Secondary.×: Not selectable for neither Primary nor Secondary.*: [COMPONENT] may be displayed as [RGB]depending on the settings of [Component/RGB-inselect]. (see page 47)Recall displayPressing displays any of the followings.● When the main input is being used for viewing andthe operating conditions for the Backup Input functionare met.HDMI116:9Main inputBackup OK