Panasonic FP2-PP2T Technical Manual

15-9A: Available N/A: Not availableErrorcode Error name Description Object Clear Countermeasures4031H Synchronous operationmethod setting errorThe operation setting for thesynchronous operation differencecheck function is incorrect.Each axis ACheck the setting value.If the error occurredrepeatedly with the correctsetting value, pleasecontact us.4042H Pulser setting errorThe pulser input mode isincorrect.The pulser operation method isincorrect.The pulser operation maximumspeed is incorrect.Each axis A4043H Pulser disable errorThe pulse input purpose for theaxis that has been set to enablethe pulser input is not set to“Pulser”.Each axis ACheck the the setting ofpulser input purpose.Set the input purpose to“Pulser” when using thepulser.4044H Speed rate error The setting of the speed rate isout of the range. Each axis ACheck the setting value.If the error occurredrepeatedly with the correctsetting value, pleasecontact us.4050H Startup speed error The setting of the startup speed isout of the range. Each axis A4080HJOG positioningacceleration/deceleration method errorThe acceleration/decelerationmethod of the JOG positioning isout of the range.Each axis A4081H JOG positioningacceleration time errorThe acceleration time of the JOGpositioning is out of the range. Each axis A4082H JOG positioningdeceleration time errorThe deceleration time of the JOGpositioning is out of the range. Each axis A4083H JOG positioning targetspeed errorThe target speed of the JOGpositioning is out of the range. Each axis A4102H Home return targetspeed errorThe target speed of the homereturn is out of the range. Each axis A4105H Home returnacceleration time errorThe acceleration time of the homereturn is out of the range. Each axis A4106H Home returndeceleration time errorThe deceleration time of the homereturn is out of the range. Each axis A4107H Home return settingcode errorThe home return setting code isincorrect. Each axis A4110H Home return creepspeed errorThe creep speed of the homereturn is out of the range. Each axis A4111H Home return returningdirection errorThe moving direction of the homereturn is out of the range. Each axis A4112H Home return limit errorThe limit switch is disabled.(It occurs when the home returnmethod is set to the stop-on-contact method 1 or 2.)Each axis A4120H Coordinate origin error The coordinate origin is out of therange. Each axis A4201H JOG operation targetspeed errorThe target speed of the JOGoperation is out of the range. Each axis ACheck the setting value.If the error occurredrepeatedly with the correctsetting value, pleasecontact us.4203HJOG operationacceleration/decelera-tion type errorThe acceleration/decelerationtype of the JOG operaiton isincorrect.Each axis A4204H JOG operationacceleration time errorThe acceleraiton time of the JOGoperation is out of the range. Each axis A4205H JOG operationdeceleration time errorThe deceleraiton time of the JOGoperation is out of the range. Each axis A4250H Current value updateerrorThe setting value of the currentvalue update is out of the range. Each axis AA: Available N/A: Not available