903. Basic operations3-11. Frame memoriesStill images can be stored in the unit’s four internal frame memories for use.The still images are transferred to the frame memories through the AUX bus and an SD memory card.Conversely, the images in the frame memories can be transferred to an SD memory card.Images in the frame memories can be used as bus images by assigning FMEM1 to FMEM4 using the crosspointassignment function.Data for images stored in the frame memory can be retained even when the power is turned off, by saving them inthe flash memory area built into the mainframe.3-11-1. Transferring images from the AUX busPress the [FMEM] button to light its indicator and display the FMEM menu. Refer to “2-1-5. LCD menu area”.Turn [F1] to display the AUX sub menu.FMEM 1|FMEM |Select |Review |Exec↓AUX | FMEM1| AUX1| Off|FMEM1-4 AUX1-4 OnTurn [F2] to select the frame memory in which to store the image using the FMEM item.Turn [F3] to select the AUX bus from which to transfer the images using the Select item.Turn [F4] to select on or off for the review display setting using the Review item.On: After the image has been imported, the images in the frame memory (FMEM1 to FMEM4) selectedfor the AUX bus are displayed (for 2 seconds).Even during review display, the next image can be imported.Off: No review display.Press the [F5] switch (Exec) to import the still images to the frame memory.The still images can also be imported using the user buttons.“StrFM1” to “StrFM4” have been allocated to the user buttons ( See “5-3-1. Setting the user buttons”.), andwhen one of these buttons is pressed, it will light for an instant, and the still image is then imported.PGMFMEM1 FMEM2AUXPGMINPUT1 INPUT2 INPUT3 INPUT4INPUT5 INPUT6 FMEM1 FMEM2AUXPGMFMEM2AUXPGMINPUT1 INPUT2 INPUT3 INPUT4INPUT5 INPUT6 FMEM1 FMEM2AUX1 2 34 5 6USERImporting to FMEM1Review displayImported still image
