443. Basic operations3-3-4. Wipe decorations (border, soft effect)A border effect or soft effect can be added to the wiping of background transitions.Setting the border and soft effectPress the [BKGD] button to light its indicator, and display the BKGD menu. Refer to “2-1-5. LCD menu area”.BKGD 1|Border | Width| Soft|Border | Off| 5.0| 0.0|On 0.1|100.00.0|100.0Turn [F1] to display the Border sub menu.Turn [F2] to set On (or Off) for the border using the Border item.Turn [F3] to set the width of the border using the Width item.Turn [F4] to set the amount of soft effect using the Soft item.When “On” has been selected as the Border item setting, the ratio of the soft effect to the border width isindicated as the amount of soft effect.When only the soft effect is to be added to wipe, select “Off” as the Border item setting. The soft effect cannot be added when SQ2, SL2 or 3D2 has been selected as the wipe pattern.Setting the border colourOn the BKGD menu, turn [F1] to display the BodrCol sub menu.BKGD 2|Hue |Sat |Lum |Load↓BodrCol | 0.0| 0.0| 100.0| White0.0|359.90.0|100.00.0|108.0YellowCyanGreenMagentaRedBlueBlackTurn [F2], [F3] and [F4] to adjust the Hue, Sat and Lum of the border colour. To call the preset colourTurn [F5] to select the preset colour using the Load item, and press the [F5] switch.The Hue, Sat and Lum values are changed to the preset colour values. To save the values that were set before calling the preset colour, refer to “3-10. Memory”.
