673. Basic operations3-5-4. PinP transitionsSet the transition time.On the TIME menu, turn [F1] to display the PinP1 sub menu (or PinP2 sub menu).As with background transitions, set the transition time. Refer to “3-1-6. Auto transition”.When the [PinP1 ON] button (or [PinP2 ON] button) in the transition area is pressed, the PinP1 image (orPinP2 image) transitions (fades in) for the length of the transition time that has been set.During fade-in, the [PinP1 ON] button (or [PinP2 ON] button) blinks in red, and when the transition iscompleted, it lights in red.When the [PinP1 ON] button (or [PinP2 ON] button) is pressed after fade-in is completed, the PinP1 image(or PinP2 image) transitions (fades out).During fade-out, the [PinP1 ON] button (or [PinP2 ON] button) lights in red, and when the transition iscompleted, it goes off.If the [PinP1 ON] button (or [PinP2 ON] button) is pressed at any point during a transition, the direction ofthe transition is reversed.3-5-5. PinP adjustmentsAdjusting the PinP position and sizeWhile the PinP menu is selected, adjust the X and Y coordinates using the positioner in the positioner area, andadjust the size using the rotary encoder [Z]. Alternatively, the settings can be performed on the menus.Press the [PinP1] button (or [PinP2] button) to light its indicator and display the PinP1 menu (or PinP2menu). Refer to “2-1-5. LCD menu area”.Turn [F1] to display the Position sub menu.Either operate the positioner and the rotary encoder [Z] or turn [F2], [F3] and [F4] to set the X and Ycoordinates and the size using the X-Pos, Y-Pos and Size items.PinP1 4|X-Pos |Y-Pos |Size |Position| 0.00| 0.00| 25.00|-50.00|50.00-50.00|50.000.00|100.00
