1648. Setting menu tableA setting is entered when an item displayed (↓) is selected and then the [F1], [F2], [F3], [F4] or [F5] switch ispressed.(It will not be entered unless the switch is pressed.)Menu Sub menu Parameter 1 Parameter 2 Parameter 3 Parameter 4Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.KEY KEY 1 Parameter Type LumKey Fill PVWKEY Setting range Lum, Linear,Chroma, FullChrmOn, ChrmOff Bus, Matte Auto, Off, OnDefault value Linear ChrmOff Bus AutoKEY 2 Parameter Clip Gain Density InvertAdjust Setting range 0.0 to 108.0 0.0 to 200.0 0.0 to 100.0 On, OffDefault value 0.0 100.0 100.0 OffKEY 3 Parameter Hue Sat Lum Load ↓FillMatt Setting range 0.0 to 359.9 0.0 to 100.0 0.0 to 108.0 White, Yellow,Cyan, Green,Magenta, Red,Blue, BlackDefault value 0.0 0.0 100.0 WhiteKEY 4 Parameter Type Width DirecEdge Setting range Off, Border, Drop,Shadow, Outline0 to 4 0, 45, 90, 135, 180,225, 270, 315Default value Off 2 0KEY 5 Parameter Hue Sat Lum Load ↓EdgeCol Setting range 0.0 to 359.9 0.0 to 100.0 0.0 to 108.0 White, Yellow,Cyan, Green,Magenta, Red,Blue, BlackDefault value 0.0 0.0 0.0 BlackKEY 6 Parameter X-Pos Y-Pos CopyTo ↓WIPEPos Setting range −100.00 to 100.00 −100.00 to 100.00 Displays the copydestination.Default value 0.00 0.00KEY 7 Parameter X-Pos Y-Pos CopyTo ↓SQPos Setting range −100.00 to 100.00 −100.00 to 100.00 Displays the copydestination.Default value 0.00 0.00KEY 8 Parameter X-Pos Y-Pos SizeFlyKEY Setting range −100.00 to 100.00 −100.00 to 100.00 0.0 to 400.0Default value 0.00 0.00 100.0KEY 9 Parameter LightModify Setting range On, OffDefault value OffKEY 10 Parameter Mask InvertMask Setting range Off, Manual, 4:3 On, OffDefault value Off Off
