1597. Image transmission functionsThis unit comes with a function for transmitting still images from the host computer to the unit via LAN and afunction for importing still images from the unit into the host computer. The image transmission software must beinstalled in the host computer from the CD-ROM supplied in order to use these functions.For details on installation, refer to “How to install the software”.SpecificationsRun the image transmission software (HS450 Tool) in a host computer which satisfies the following conditions.• Operating system: Windows 2000 or Windows XP• Processor: Pentium III, 1 GHz or better recommended• RAM: 256 MB or more recommended• Hard disk drive: At least 50 MB of free memory• LAN: 100BASE-TX/10BASE-T• Display: TrueColour (24 bit, 32 bit colour), 800 600 dots or moreThe image formats supported include bitmap (bmp), JPEG (jpg), TIFF (tif), GIF (gif) and PNG (png).The image transmission software is equipped with a function for automatically converting images into the specifiedvideo format size.ConnectionsConnect the LAN connector on the mainframe to the host computer using the LAN cable.The LAN connector comes with an Auto-MDI/MDI-X function. Use a LAN straight cable or LAN crossover cable forthe connection.For details on network setup such as IP addresses, refer to “5-5. Network settings”.SIGNALGNDREFEDITORCOMTALLY/GPIPANELLAN2 3 4 5 6321 4 5 6 7 8 9 10 11 12 13 14 15 16 C/CU/C1SDI OUTPUTSSDI INPUTSDVI-D OUTPUTSIN/OUT B2IN/OUT B1SLOT BIN/OUT A2IN/OUT A1SLOT ALAN cable
