1435. System settings5-7-3. Setting the GPIThe user can set the functions that are to be controlled from the GPI ports and set whether to enable the control. Refer to “6-2-4. TALLY/GPI” and “6-3-1. TALLY/GPI”.Press the [CONFIG] button to light its indicator and display the CONFIG menu. Refer to “2-1-5. LCD menu area”.Turn [F1] to display the sub menu corresponding to the TALLY/GPI connector concerned and set the functionto be controlled by the GPI port.TALLY/GPI connector of mainframe:GPIM-In sub menu and GPIM-Out sub menuCONFIG 4|Port |Assign | |GPIENGPIM-In | —|NoAsign| |DisablePort1-8 EnableCONFIG 5|Port |Assign | |GPIENGPIM-Out| —|NoAsign| |DisablePort1|Port31EnableTALLY/GPI connector of control panel:GPIP-In sub menu and GPIP-Out sub menuCONFIG 6|Port |Assign | |GPIENGPIP-In | —|NoAsign| |DisablePort1-8 EnableCONFIG 7|Port |Assign | |GPIENGPIP-Out| —|NoAsign| |DisablePort1-8 EnableTurn [F2] to select the port to be controlled using the Port item.Turn [F3] to select the function to be assigned using the Assign item. Refer to “Control using the GPI input port” and “Output from the GPI output port”.Turn [F5] to set enable or disable for the control to be exercised from each port using the GPIEN item.Enable: Control is enabled.Disable: Control is disabled. Settings for the GPIEN item can be assigned to one of the user buttons. See “5-3-1. Setting the user buttons”.
