Panasonic AV-HS450E Operating Instructions Manual

Contents

Panasonic AV-HS450E Operating Instructions Manual Manual pdf 139 page image

1395. System settings5-5. Network settingsProceed with the network settings to perform such tasks as updating the software version via LAN.The network initial setup is: IP address: 192.168.0.10, subnet mask: 255.255.255.0.When using the host computer with settings matching the network setup, it is not necessary to setup via themenu.For the setting to take effect, the system must be rebooted. Turn the system’s power off and then back on.Setting the IP addressPress the [SYSTEM] button to light its indicator and display the SYSTEM menu. Refer to “2-1-5. LCD menu area”.Turn [F1] to display the NetWork1 sub menu.Turn [F2] to [F5] to set the IP address, and press the [F5] switch (Save) to enter the address.SYS 7|IP Address | Save↓NetWork1| 192| 168| 0| 100-255 0-255 0-255 0-255Setting the subnet maskOn the SYSTEM menu, turn [F1] to display the NetWork2 sub menu.Turn [F2] to [F5] to set the subnet mask, and press the [F5] switch (Save) to enter the mask.SYS 8|Subnet Mask | Save↓NetWork2| 255| 255| 255| 00-255 0-255 0-255 0-255Display the MAC addressOn the SYSTEM menu, turn [F1] to display the NetWork3 sub menu.The MAC address now appears. (When the MAC address is “008045448000”.)SYS 9|MAC AddressNetWork3| 008045448000