753. Basic operations3-6-3. DSK transitionsSet the transition time.On the TIME menu, turn [F1] to display the DSK1 sub menu (or DSK2 sub menu).As with background transitions, set the transition time. Refer to “3-1-6. Auto transition”.When the [DSK1 ON] button (or [DSK2 ON] button) in the transition area is pressed,the DSK1 image (or DSK2 image) is combined (fades in) for the length of the transitiontime that has been set. DSK1ONDSK2ONDuring fade-in, the [DSK1 ON] button (or [DSK2 ON] button) blinks in red, and when the transition iscompleted, it lights in red.When the [DSK1 ON] button (or [DSK2 ON] button) is pressed after fade-in is completed, the DSK1 image(or DSK2 image) transitions (fades out).During fade-out, the [DSK1 ON] button (or [DSK2 ON] button) lights in red, and when the transition (fade-out) is completed, it goes off.If the [DSK1 ON] button (or [DSK2 ON] button) is pressed at any point during a transition, the direction of thetransition is reversed.3-6-4. DSK previewSelect whether to output the DSK1 (or DSK2) preview image to the preview output.Press the [DSK1] button (or [DSK2] button) to light its indicator and display the DSK1 menu (or DSK2menu). Refer to “2-1-5. LCD menu area”.DSK1 1|Type |LumKey |Fill |PVWDSK1 | Linear|ChrmOff| Bus| OffLum ChrmOn Matte OnTurn [F5] to set the PVW item.On: An image with the DSK1 (or DSK2) effect added is output to the preview output.Off: An image without the DSK1 (or DSK2) effect added is output to the preview output.PVW On and Off can be allocated to the user buttons. See “5-3-1. Setting the user buttons”.
