743. Basic operations3-6-2. Selecting the DSK channel and DSK fill materialWhen the [DSK 1/2] button among the AUX bus selector buttons is pressed and it has lit in amber, DSK1 isdisplayed as the menu.The state in which the DSK1 fill material is selected is now established for the AUX bus crosspoint buttons.If the button has lit in green, DSK2 is displayed as the menu, and the state in which the DSK2 fill material isselected is now established for the AUX bus crosspoint buttons.The selected AUX bus crosspoint button lights in amber. (It will light in red if the selected signal is a PGM outputsignal.)AUXKEY PinP 1/2 DSK 1/2 AUX1 AUX2 AUX3 AUX4SHIFTCAMMEM1 2 34 5 6KEYMENU FUNCTION / AUX BUS DELEGATION USERCKEY BKGDPinP1PinP2DSK1DSK2TIMECBGDIMAGE AIMAGE BFMEMSDCardCTLCAMXPTMVINOUTCONFIGSYSAMBER:1 / GREEN :2Selecting the DSK source signalAs with the selection of the KEY source signal, set the DSK source for the DSK fill.This setting is the same for KEY and DSK. Setting with AUX bus crosspoint buttonsPress the [DSK 1/2] button (or [KEY] buttons) of the AUX bus selector buttons to light its indicator, and holddown the AUX bus crosspoint button for the selected key fill signal.XPTStats| FILL: INPUT1 SRC↓ INPUT1| XPT : 1Turn the [F5] and select a DSK source signal (SRC) for the DSK fill signal (FILL), and press the [F5] switch. Setting in the CONFIG menuPress the [CONFIG] button to light its indicator,and display the CONFIG menu. Refer to “2-1-5. LCD menu area”.Turn [F1] to display the KSAsign sub menu.Turn [F2] to select the DSK fill material using theFill item.Turn [F3] to select the DSK source material usingthe Source item, and press the [F3] switch.CONFIG11|Fill |Source↓| |KSAsign | —| —| |IN1-16IN-A1IN-A2IN-B1IN-B2CBGDCBARFMEM1-4IN1-16IN-A1IN-A2IN-B1IN-B2CBGDCBARFMEM1-4NoAsignThe luminance and chroma keys are used as selfkeys so the DSK fill signal can be used as the DSKsource signal regardless of the menu setting.
