623. Basic operations3-4-7. Key decorationsA border, shadow or other edge can be added to the key.Setting the key edgePress the [KEY] button to light its indicator anddisplay the KEY menu. Refer to “2-1-5. LCD menu area”.Turn [F1] to display the Edge sub menu.KEY 4|Type |Width |Direc |Edge | Off| 2| 0|BorderDropShadowOutline0-4 4590135180225270315Turn [F2] to select the edge type.Off: An edge is not added.Border: A border is added around the entire edge.Drop: A diagonal border is added.Shadow: A shadow is added.Outline: An outline (only a border with no fill) is added.Border Drop OutlineShadowTurn [F3] to set the edge width.Turn [F4] to set the direction (in 45-degree increments) in which “Drop” and “Shadow” will be added.(Top)(Bottom)(Right)(Left)225180 270135 3154590 0Setting the edge colourOn the KEY menu, turn [F1] to display the EdgeColsub menu.Turn [F2] ,[F3] and [F4] to adjust the Hue, Sat andLum of the edge colour.KEY 5|Hue |Sat |Lum |Load↓EdgeCol | 0.0| 0.0| 0.0| Black0.0|359.90.0|100.00.0|108.0WhiteYellowCyanGreenMagentaRedBlue To call the preset colourTurn [F5] to select the preset colour using the Load item, and pressthe [F5] switch.The Hue, Sat and Lum values are changed to the preset colourvalues. To save the values that were set before calling the preset colour,refer to “3-10. Memory”.