1425. System settings5-7-2. Editor controlThe following lists the functions which can be controlled by editing controller AG-A850.(Compliant with the GVG protocol)• Read command• Crosspoint switch• Wipe pattern selection (BKGD)• Transition mode (MIX/WIPE) selection• Auto transition time setting• Auto transition execution
GVGprotocolAV-HS450EGVGprotocolAV-HS450EGVGprotocolAV-HS450EGVGprotocolAV-HS450E1WIPE No.122SQ1 No.10433D1 No.764SL2 No.42WIPE No.223—443D1 No.865—3WIPE No.324SQ1 No.12453D1 No.966SL2 No.64WIPE No.425SL1 No.1463D1 No.1067—5WIPE No.526SL1 No.2473D1 No.1168SL2 No.86WIPE No.627SL1 No.3483D1 No.1269—7WIPE No.728SL1 No.449—70—8WIPE No.829SL1 No.550SQ2 No.271—9WIPE No.930SL1 No.651—72—10WIPE No.1031SL1 No.752SQ2 No.473—11WIPE No.1132SL1 No.853—74SD2 No.212WIPE No.1233SL1 No.954SQ2 No.675—13SQ1 No.134—55—76SD2 No.414SQ1 No.235—56SQ2 No.877—15SQ1 No.336—57—78SD2 No.616SQ1 No.4373D1 No.158—79—17SQ1 No.5383D1 No.259—80SD2 No.818SQ1 No.6393D1 No.360—81—19SQ1 No.7403D1 No.461—82—20SQ1 No.8413D1 No.562SL2 No.283—21SQ1 No.9423D1 No.663—84—On the RS422 sub menu of the CTL menu, set On or Off for control from the external device (editor) connected tothe EDITOR connector.For details on the settings, see “5-7-1. Enable/disable setting for control of external devices”.