1335. System settings5-2. Setting the crosspoints5-2-1. Assigning signals to the crosspointsExternal video input signals and internally generated signals can be assigned to crosspoint buttons 1 to 32.Displaying the assignment statusesPress the [XPT] button to light its indicator and display the XPT menu. Refer to “2-1-5. LCD menu area”.Turn [F1] to display the Stats1 to 4 sub menu.The status of the assignment is displayed. The names of the assigned signals are abbreviated on the display.XPT 1|XPT : 1 2 3 4 5 6 7 8Stats1 |SIG : BK 1 2 3 4 5 6 7When one of the crosspoint buttons 1 to 32 is held down, the name of the signal assigned is displayed on theLCD while the button is held down.Example: When crosspoint button 1 is pressed (when the INPUT1 signal has been assigned to this button)XPT 1|XPT : 1Stats1 |SIG :IN1“SHIFT” will be displayed for XPT16 when the SHIFT function has been assigned to the crosspoint 16button.Assigning signals to the crosspointsPress the [XPT] button to light its indicator anddisplay the XPT menu. Refer to “2-1-5. LCD menu area”.Turn [F1] to display the XPTAsign sub menu.Turn [F2], select the crosspoint button using theXPT item, turn [F3] and select the input signalusing the Signal item.Changing the current assignment of the signalsselected by the crosspoint buttons will cause thepositions of the lit crosspoint buttons to changeto correspond with the assignment change. Theimages output at this time will remain unchanged.XPT 5|XPT |Signal |Shift |Sf-LockXPTAsign| —| —| Right| Off1-32 IN1-16IN-A1IN-A2IN-B1IN-B2BlackCBGDCBARFMEM1-4PGMPVWKeyOutCLNMV1,MV2NoAsignOffLeftOn
