885. System settings5-5. Network settingsProceed with the network settings to perform such tasks as updating the software version via LAN.The network initial setup is: IP address: 192.168.0.10, subnet mask: 255.255.255.0 and gateway: 0.0.0.0 (unused).When using the host computer with settings matching the network setup, it is not necessary to setup via themenu.For the setting to take effect, the system must be rebooted. Turn the system’s power off and then back on.Setting the IP address1 Press the [FUNC] button to light its indicator, and press the [SYSTEM] button to display the SYSTEM menu.2 Turn [F1] to display the Network1 sub menu.3 Turn [F2] to [F5] to set the IP address, and press the [F5] switch (Save) to enter the address.NetWork1 IP Address Save↓9/16 192 168 0 10-255 0-255 0-255 0-255Setting the subnet mask1 Press the [FUNC] button to light its indicator, and press the [SYSTEM] button to display the SYSTEM menu.2 Turn [F1] to display the Network2 sub menu.3 Turn [F2] to [F5] to set the subnet mask, and press the [F5] switch (Save) to enter the mask.NetWork2 Subnet Mask Save↓10/16 255 255 255 00-255 0-255 0-255 0-255Setting the gateway1 Press the [FUNC] button to light its indicator, and press the [SYSTEM] button to display the SYSTEM menu.2 Turn [F1] to display the Network3 sub menu.3 Turn [F2] to [F5] to set the gateway, and press the [F5] switch (Save) to enter the gateway.NetWork3 Gateway Save↓11/16 0 0 0 00-255 0-255 0-255 0-255Display the MAC address1 On the SYSTEM menu, turn [F1] to display the Network4 sub menu.The MAC address now appears. (When the MAC address is “008045448000”.)NetWork4 MAC Address12/16 008045448000
