Panasonic AV-HS400AN Operating Instructions Manual

Also see for AVHS400AN - MULTI-FORMAT LIVE SWITCHER: Operating instructions

Contents

Panasonic AV-HS400AN Operating Instructions Manual Manual pdf 27 page image

273. Basic operations3-2-5. Modifying wipe Setting the lighting effectLighting effects can be added when the following wipe patterns have been selected:3D page: #1, #3, #7, #91 Press the [FUNC] button to light its indicator, and press the [WIPE] button to display the WIPE menu.2 Turn [F1] to display the Modify sub menu.Modify Light-B Light-K Trim 4:3Auto5/5 Off Off 16:9 OffOn On 4:34:3SmthOffOn3 Turn [F2] to select whether the lighting effect at the time a background transition is executed is to be addedusing the Light-B item.On: The lighting effect is added.Off: The lighting effect is not added.4 Turn [F3] to select whether the lighting effect at the time a key transition is executed is to be added using theLight-K item.On: The lighting effect is added.Off: The lighting effect is not added. Setting the trimmingWhen SQ, SL or 3D has been selected as the wipe pattern, the trimming at the time a background transition isexecuted can be set.The “4:3” and “4:3Smth” settings for the Trim item take effect when the HD format has been selected as thesystem format setting.1 On the WIPE menu, turn [F1] to display the Modify sub menu.2 Turn [F4] to set the trimming operation and transition operation using the Trim item.16:9 (On): For trimming the edges around the material.This setting is used when a black border, for instance, can be seen around the material.When HD has been selected as the system format setting, “16:9” is displayed on the menu, butwhen SD has been selected as the system format setting, “On” is displayed on the menu.4:3: For trimming using the 4:3 aspect ratio and releasing the trimming when the transition iscompleted.4:3Smth: For trimming using the 4:3 aspect ratio and executing the transition to 16:9 images smoothly.Off: No trimming3 Turn [F5] to select the setting for automatic trimming (4:3 or 4:3Smth) in accordance with the material usingthe 4:3Auto item.Off: All input materials are targeted for automatic trimming.On: Using the up-converter setting, the input materials for which EC (edge crop) is selected are targeted forautomatic trimming.