784. Input/output signal settings4-7-4. Changing the material namesChange the INPUT1 to INPUT8 material names shown on the multi view display.The default settings, preset settings or user settings can be selected for these names.When the preset settings and user settings are established, the “input number : material name” (1 : CAM1, etc.)display format is used.1 Press the [FUNC] button to light its indicator, and press the [IN/OUT] button to display the IN/OUT menu.2 Turn [F1] to display the Multi3 sub menu.Multi3 Signal Type↓ Name8/15 IN1 Defalt INPUT1IN1-8 PresetUserINPUT1|INPUT83 Turn [F2] to select the input signals using the Signal item.4 Turn [F3] to select the type of material name using the Type item, and press the [F3] switch to enter the type.An asterisk () appears at the left of the type of material name currently selected.Defalt: The default settings for INPUT1 to INPUT8 are selected.Preset: The material names and number provided ahead of time are selected.User: The material names are set using 6 characters.If the Type item setting is changed when “Preset” or “User” is selected, the previously provided materialnames will be lost. Preset type setting procedure1 On the Multi3 sub menu, turn [F3] to select “Preset”using the Type item.2 Turn [F4] to select the material name using the Nameitem.3 Turn [F5] to select the material number using the NO.item, and press the [F5] switch to enter the number.Multi3 Signal Type↓ Name NO.()↓8/15 IN1 Preset CAM 1IN1-8 CCGCGVCGKPCVVTRVCR1-9 User type setting procedure1 On the Multi3 sub menu, turn [F3] to select “User”using the Type item.2 Turn [F4] to move the “” cursor to the position of thecharacter to be changed using the Name item.Multi3 Signal Type↓ Name (■)↓8/15 IN1 User ■am1 CIN1-83 Turn [F5] to select the character, and press the [F5]switch to enter it.4 Set all the characters in the material name byrepeating steps 2 and 3.
