Panasonic AV-HS400AN Operating Instructions Manual

Also see for AVHS400AN - MULTI-FORMAT LIVE SWITCHER: Operating instructions

Contents

Panasonic AV-HS400AN Operating Instructions Manual Manual pdf 70 page image

704. Input/output signal settings4-5. Setting the sync signalsThe sync signals to be used by the system can be selected.External sync: For synchronization with an external sync signal (gen-lock).The reference input signal is looped through and output.BBST: Black burst signal (vertical phase of 0H)BBAD: Black burst signal(Vertical phase of 90H when the 59.94i or 59.94p format is selected;vertical phase of 75H when the 50i or 50p format is selected)TRI: Tri-level sync signal (vertical phase of 0H)This can be selected when HD format signals are supplied.Internal sync: For synchronization with an internal reference signal (INT).The REFOUT signal (black burst signal) is output from the two reference connectors.1 Press the [FUNC] button to light its indicator, and press the [IN/OUT] button to display the IN/OUT menu.2 Turn [F1] to display the Ref sub menu.Ref Sync↓ BBSetup GenLock3/15 BBST 7.5IRE LockedBBADTRIINT0IRE UnLock3 Turn [F2], select the sync signal using the Sync item, and press the [F2] switch to enter the selection.An asterisk () appears at the left of the reference signal currently selected.4 Turn [F3] to select the setup level of the black burst signal in the internal synchronization mode using theBBSetup item.This setting takes effect when the video system is 59.94i or 59.94p.The setup level is fixed at 0 IRE when the system is 50i or 50p.The genlock status is displayed in the GenLock item.Locked: Synchronized with the external sync signal or internal reference signal.UnLock: Not synchronized with the external sync signal or internal reference signal.