845. System settings5-2. Setting the crosspoints5-2-1. Assigning signals to the crosspointsExternal video input signals and internally generated signals can be assigned to crosspoint buttons 1 to 10.Displaying the assignment statuses1 Press the [FUNC] button to light its indicator, and press the [XPT] button to display the XPT menu.2 Turn [F1] to display the XPTStats sub menu.The status of the assignment is displayed. The names of the assigned signals are abbreviated on thedisplay.XPTStats SIG:B 1 2 3 4 5 6 7 8 G1/3 XPT:1 2 3 4 5 6 7 8 9 10When one of the crosspoint buttons 1 to 10 is held down for a long time, the name of the signal assigned isdisplayed on the LCD while the button is held down.Example: When crosspoint button 1 is pressed (when the INPUT1 signal has been assigned to this button)XPTStats SIG:IN1XTP:1Assigning signals to the crosspoints1 Press the [FUNC] button to light its indicator, andpress the [XPT] button to display the XPT menu.2 Turn [F1] to display the XPTAsign sub menu.3 Turn [F2], select the crosspoint button using the XPTitem, turn [F3] and select the input signal using theSignal item.Changing the current assignment of the signalsselected by the crosspoint buttons will cause thepositions of the lighted crosspoint buttons to change tocorrespond with the assignment change. The imagesoutput at this time will remain unchanged.XPTAsign XPT Signal2/3 1 IN11-10 IN1-8BlackCBGDCBARFMEM1FMEM2NoneThe table below lists the materials which can be assigned.Button Signal Abbreviation DescriptionXP1 to 10 INPUT1 to 8 IN1 to 8 1 to 8 SDI, analog component,analog composite and DVIBLACK Black B Internally generated signal, blackCOLOR BACKGROUND CBGD G Internally generated signal, colorbackgroundCOLOR BAR CBAR C Internally generated signal, color barFRAME MEMORY1, 2 FMEM1, 2 F1, F2 Frame memory imageNone None — No assignment The image will not be changed by pressing any button to which “None” is assigned.
