Panasonic AV-HS400AN Operating Instructions Manual

Also see for AVHS400AN - MULTI-FORMAT LIVE SWITCHER: Operating instructions

Contents

Panasonic AV-HS400AN Operating Instructions Manual Manual pdf 32 page image

323. Basic operations5 Execute the transition.Press the [AUTO] button to execute the transition automatically for the transition time which has been set.Alternatively, execute the transition manually by operating the fader lever.When the KEYAuto function has been assigned to the [FTB] button, the transition will be executedautomatically for the transition time which has been set when the [FTB] key is pressed no matter whichtransition mode has been selected.During key in, the indicator of the [FTB] button blinks in red, and it lights in red when the transition iscompleted.If the [FTB] button is pressed with the picture completely keyed in, the Key image transition (key out) isexecuted.During key out, the indicator of the [FTB] button lights in red, and it goes off when the transition iscompleted.If the [FTB] button is pressed during the transition, the transition direction is reversed.3-3-4. Key previewKey preview images can be output to the preview output, and the keys can be adjusted and checked.On the KEY menu, turn [F1] to display the KEY sub menu.Turn [F5] to set the preview mode using the PVW item.On: An image with key effects added is output to the preview output.Off: An image with no key effects added is output to the preview output.Auto: The preview image of the next transition is output to the preview output.3-3-5. Adjusting the luminance key and linear keyThese steps are taken to adjust the luminance key and linear key definition.1 Press the [FUNC] button to light its indicator, and press the [KEY] button to display the KEY menu.2 Turn [F1] to display the Adjust sub menu.Adjust Clip Gain Density Invert2/9 0.0 100.0 100.0 Off3 Turn [F2], [F3] and [F4] to adjust the key definition.4 Turn [F5] to set key invert.When On is selected, the key signals to be generated internally are inverted.Operation Parameter Description of setting Setting rangeF2 Clip Reference level for generatingkey signals 0.0 to 108.0F3 Gain Key amplitude 0.0 to 200.0F4 Density Key density 0.0 to 100.0F5 Invert Key signal inversion On, Off