383. Basic operations3-3-9. Flying keyUsing DVE effects, this key enables the key signals that have been input to be moved, expanded or contracted.In order for the flying key to take effect, select SL #5 as the key transition.When the key transition is executed, the keys are combined by the key signals set using the flying key menu.(The transition effect is fixed at MIX.)Since the flying key uses DVE effects, the image is delayed by one frame.When the SL #5 button is double-clicked, delegation to the FlyKEY menu is initiated.1 Press the [FUNC] button to light its indicator, and press the [KEY] button to display the KEY menu.2 Turn [F1] to display the FlyKEY sub menu.FlyKEY X-Pos Y-Pos Size9/9 0.00 0.00 100.0-100.00|100.00-100.00|100.000.0|400.03 Turn [F2] to set the X coordinate of the key signal using the X-Pos item.4 Turn [F3] to set the Y coordinate of the key signal using the Y-Pos item.5 Turn [F4] to set the key signal change size (max. 400: 400 %) using the Size item.ABC ABCKey signal When combined using theflying keyIn order to add the edge of the key before the DVE effect, the thickness of the edge is also changed when thesize is changed. PinP combinations using the flying keyWhen “Full” is selected by the Type item in “3-3-1. Selecting the key type,” PinP combinations are enabled usingthe flying key.(At this point in time, the Clip item and Gain item cannot be set on the Adjust sub menu.)With the full key, the image on the full screen serves as the key source signal so an edge will not be addedunless a further step is taken.To add an edge, mask the key signals so that the key source signals are made smaller than the entire screen.For details on masking, refer to “3-3-8. Masking the key signals”.
