Panasonic AV-HS400AN Operating Instructions Manual

Also see for AVHS400AN - MULTI-FORMAT LIVE SWITCHER: Operating instructions

Contents

Panasonic AV-HS400AN Operating Instructions Manual Manual pdf 25 page image

253. Basic operations3-2-2. Selecting the wipe directionOperate the wipe direction selector buttons to select the wipe direction for the background transition.(The key transitions are set by the menu. The direction which is set here will not be reflected.  See 3-3-3.)When the [R] indicator is off:Wiping proceeds in the normal direction.When the [R] indicator is lighted:Wiping proceeds in the reverse direction.When the [N/R] indicator is lighted:The normal direction is replaced with the reversedirection (or vice versa) when the transition iscompleted.(The lighted and extinguished statuses of the [R]button are also switched in line with the direction of thewiping.)!.""!"!"!"2!! "!.2"! "3-2-3. Wipe decorations (border, soft effect)A border effect or soft effect can be added to the wiping of background transitions (but not for key transitions). Setting the border and soft effect1 Press the [FUNC] button to light its indicator, and pressthe [WIPE] button to display the WIPE menu.2 Turn [F1] to display the Border sub menu.3 Turn [F2] to set On (or Off) for the border using theBorder item.4 Turn [F3] to set the width of the border using the Widthitem.5 Turn [F4] to set the amount of soft effect using the Softitem. The soft effect is OFF if 0.0 is set.Border Border Width Soft1/5 Off 5.0 0.0On 0.1|100.00.0|100.0When “On” has been selected as the Border item setting, the ratio of the soft effect to the border width isindicated as the amount of soft effect.When only the soft effect is to be added to wipe, select “Off” as the Border item setting. Setting the border color1 On the WIPE menu, turn [F1] to display the BodrColsub menu.2 Turn [F2], [F3] and [F4] to adjust the Hue, Sat and Lumof the border color.To call the preset colorTurn [F5] to select the preset color using the Load item,and press the [F5] switch.The Hue, Sat and Lum values are changed to the presetcolor values. To save the values that were set before calling thepreset color, refer to “3-10. Preset memory”.BodrCol Hue Sat Lum Load↓2/5 0.0 0.0 100.0 White0.0|359.90.0|100.00.0|108.0YellowCyanGreenMagentaRedBlueBlack