11610. Specifications and standard accessoriesSpecificationsInputs 8 video input lines (maximum)4 standard video input lines:SDI inputs 4Maximum of an additional 4 video input lines as options:SDI inputs 2, analog component (HD/SD) inputs 2, DVI inputs 2,analog composite inputs 2Up to two optional boards from among the various optional input boards(incorporating two up-converter lines) can be additionally connected.Reference 1Outputs 7 video signal lines (maximum)3 standard video output lines (SDI):PGM outputs 2, OUTPUT1 output 1, OUTPUT2 output 1Maximum of an additional 4 video output lines as options:OUTPUT3 to 6 1 outputUp to two optional boards from among the analog component (HD/SD) 2,DVI 1/analog component 1, and SDI 2 (incorporating two down-converterlines) output boards can be additionally connected. PGM, PVW, AUX, MULTI and KEYOUT can be assigned to OUTPUT1 to 6.Reference 1Signal formats HD: 1080/59.94i, 1080/50i, 720/59.94p, 720/50pSD: 480/59.94i, 576/50iSignal processing Y:Cb:Cr 4: 2: 2, 10 bitRGB 4:4:4, 8 bitME number 1MESDI inputs HD: Serial digital (SMPTE 292M)SD: Component digital (SMPTE 259M)BNC connector, IN1 to 8 (with active through), up to 8 lines IN5 to 8 are optional inputs.HD [SMPTE 292M (BTA S-004B) standard complied with]• 0.8 Vp-p 10 % (75 )• Input return loss More than 15 dB (5 MHz to 750 MHz)More than 10 dB (750 MHz to 1.5 GHz)• Automatic equalizer 328 ft. (100 m) (when 5C-FB cable is used)SD [SMPTE 259M standard complied with]• 0.8 Vp-p 10 % (75 )• Input return loss More than 15 dB (5 MHz to 270 MHz)• Automatic equalizer 656 ft. (200 m) (when 5C-2V cable is used)
