Panasonic AV-HS400AN Operating Instructions Manual

Also see for AVHS400AN - MULTI-FORMAT LIVE SWITCHER: Operating instructions

Contents

Panasonic AV-HS400AN Operating Instructions Manual Manual pdf 62 page image

624. Input/output signal settings4-1-2. Setting the input modeThe mode can be set for each input only when HD has been selected as the system format.When SD is selected as the system format, the input mode is always the same as Normal.Normal: Input signals in conformity with the system format take effect.D by D: When SD signals with the same frame rate as the system format have been input, they are input on adot by dot (1 magnification) basis with no up-conversion.(This setting is only possible when the system format is 1080i.)In this mode, there is minimal deterioration in the image quality and, as such, the mode is used tocombine SD format material using the PinP function.UC: When SD signals with the same frame rate as the system format have been input, they areup-converted. (This mode can be selected for inputs 5 to 8 only.)Auto: Input signals in conformity with the system format take effect.Furthermore, if SD signals with the same frame rate as the system format are input when HD isselected as the system format, they are up-converted. (This mode can be selected for SDI inputs 5 to8 only.) In the Auto mode, the images may be disturbed when the input signals are switched.1 On the Input sub menu, turn [F2] to select the input signals using the Signal item.2 Turn [F4] to set the input mode using the Mode item, and press the [F4] switch to enter the selection.An asterisk () appears at the left of the input mode currently selected.System Mode Input480/59.94i 576/50i 1080/59.94i 1080/50i 720/59.94p 720/50pSD 480/59.94i — ○ ■ ■ ■ ■ ■576/50i — ■ ○ ■ ■ ■ ■HD 1080/59.94i Normal ■ ■ ○ ■ ■ ■D by D ○ ■ ■ ■ ■ ■UC ○ ■ ■ ■ ■ ■Auto ○ (UC) ■ ○ ■ ■ ■1080/50i Normal ■ ■ ■ ○ ■ ■D by D ■ ○ ■ ■ ■ ■UC ■ ○ ■ ■ ■ ■Auto ■ ○ (UC) ■ ○ ■ ■720/59.94p Normal ■ ■ ■ ■ ○ ■UC ○ ■ ■ ■ ■ ■Auto ○ (UC) ■ ■ ■ ○ ■720/50p Normal ■ ■ ■ ■ ■ ○UC ■ ○ ■ ■ ■ ■Auto ■ ○ (UC) ■ ■ ■ ○  denotes a black screen. The UC mode or Auto mode cannot be selected for inputs 1 to 4. If D by D, UC or Auto mode is selected, the frame synchronizer will be turned on. The input mode cannot be changed when freeze is set to on.