Panasonic AG-RCP30P Operating Instructions Manual

Also see for AG-RCP30P: Operating instructions

Panasonic AG-RCP30P Operating Instructions Manual Manual pdf 55 page image

55Error MessagesNo. Message MeasureE02431 DSP error. Reproduction andrecord cannot be performed.Wait until the error message is cleared.Call your supplier if the message doesnot clear after about a minute.E02432E02440 System errorCouldn’t format P2 cards. Insert another P2 card.E02441 Couldn’t format P2 cards.E02442 Found read only P2 cards.Couldn’t format.Disable P2 card write-protection.E02443 Not P2 card.Couldn’t format.The inserted card is not a P2 card.Replace the card with a P2 card.E02444 No card.Couldn’t format.Insert a P2 card.E02460 System errorCouldn’t delete files.Contact your supplier.E02461 Couldn’t delete files.E02470 System errorCouldn’t restore files.E02471 Couldn’t restore files.E02481 Write error on slot1.Record cannot be continued.Be sure to use the correct procedureto remove and load P2 cards. Replacea P2 card that is not recognized afterinserting it in the P2 card slot andclosing the P2 card slot cover.E02482 Write error on slot2.Record cannot be continued.E07671 Camera communication error.Camera cannot be controlled.The Color Camera may not be correctlyconnected. Check whether the cameracable (included in the Color Camera)is correctly connected to the ColorCamera. Call your supplier if thismeasure does not solve the problem.E08601 Lid open.Reproduction and recordcannot be performed.Close the P2 card slot cover.E08602 The recorder’s fan hasstopped.Contact your supplier.E10400 Radar model file not found.E10401 More than five radar modelfiles found.E10402 Invalid radar model filefound.E10403 Radar model file read error.E10410 Radar communication error.Please check the radarsetting.