Panasonic AG-RCP30P Operating Instructions Manual

Also see for AG-RCP30P: Operating instructions

Panasonic AG-RCP30P Operating Instructions Manual Manual pdf 32 page image

Setup/Admin [1/2]Rec/PlayDate/TimeOSDTriggerManagement ModeCameraRegistrationProgramed RecSetup/Admin [2/2]Radar/GPSAuto MaintenanceFile ManagementService32Rec/PlayPowerOff TimeUse this function to set the intervalafter which the Memory Card VideoRecorder and this unit will shut downafter the ignition switch has been setto the LOCK (OFF) position.Setting (min.):0/10/20/30/60/90/120/180Init Camera SelectSelect the camera selected at power-on.1: Color Camera connected tothe [CAMERA1] connector2: Commercially available cameraconnected to the [CAMERA2]connectorLAST: See footnote.∗1Init Audio2 In SelectSelect the Audio2 input selected atpower-on.INCAR : Input signal of the [IN CARMIC] connectorWMIC : Input signal of the [AUDIOIN 2] connectorLAST : See footnote.∗1PowerOn RecUse this function to set recording tostart when the Memory Card VideoRecorder is turned on.Setting : ON/OFFLoop RecUse this function to record new databy deleting the oldest files when thereis no free space left on a P2 card.Setting : ON/OFFIntermittent RecUse this function to record∗2 onevideo frame per second.Setting : ON/OFFResolution/RecRateUse th is function to set the screenresolution and the recording rate.Q-512kbps :320X240 512 kbps 30 fpsQ-1Mbps :320X240 1 Mbps 30 fpsF-1Mbps :720X480 1 Mbps 10 fpsF-2Mbps :720X480 2 Mbps 30 fpsAdministrator Setup (continued)∗1 Applies the setting in effect when power was last turned off. Unless power isturned off properly, the operating state may not be saved correctly.∗2 Normal recording records 10 or 30 video and audio frames per second.