806. Maintenance2. Loosen the two screws securing the lamp housing until the phillips screwdriver goes into a freewheelingcondition. The two screws are not removable.Remove the lamp housing by holding it.NOTE: There is an interlock on this case to prevent the risk of electrical shock. Do not attempt to circumvent this interlock.3. Insert a new lamp housing until the lamp housing is plugged into the socket.CAUTIONDo not use a lamp other than the NEC replacement lamp NP06LP.Order this from your NEC dealer.Secure it in place with the two screws.Be sure to tighten the screws.InterlockDownloaded From projector-manual.com NEC Manuals
