303. Projecting an Image (Basic Operation) Optimizing an RGB Image AutomaticallyAdjusting the Image Using Auto AdjustOptimizing an RGB image automatically.Press the AUTO ADJUST (AUTO ADJ.) button to optimize an RGB image automatically.This adjustment may be necessary when you connect your computer for the first time.[Poor picture][Normal picture]Sound level from the speaker and the AUDIO OUTjack (Stereo mini) on the projector can be adjusted.Another way to adjust volume is to use the menu.Select [ADJUST] → [AUDIO] → [VOLUME] fromthe menu.NOTE:• Volume control is not available with the or buttonwhen an image is enlarged by using the MAGNIFY (+)button or when the menu is displayed.NOTE:• Some signals may take time to display or may not be displayed correctly.• The Auto Adjust function does not work for component, video, S-video, and DVI digital signals.• If the Auto Adjust operation cannot optimize the computer signal, try to adjust [HORIZONTAL], [VERTICAL], [CLOCK], and[PHASE] manually. (→ page 58, 59) Adjusting Volume Up & DownIncrease volumeDecrease volumeDownloaded From projector-manual.com NEC Manuals
