Network Settingshttp:// projector’s IP address> /index.htmlDHCP ����������������������������Enabling this option automatically assigns an IP address to the projector from your DHCP server� Dis-abling this option allows you to register the IP address or subnet mask number obtained from yournetwork administrator�TIP: You can check the IP address in the menu when [ENABLE] is selected for [DHCP]. To do so, fromthe menu, select [INFO.] → [WIRED LAN].IP ADDRESS �����������������Set your IP address of the network connected to the projector when [DISABLE] is selected for [DHCP]�TIP: You can check your specified IP address in the menu. To do so, from the menu, select [INFO.] →[WIRED LAN].SUBNET MASK �������������Set your subnet mask number of the network connected to the projector when [DISABLE] is selectedfor [DHCP]�DEFAULT GATEWAY ������Set your default gateway of the network connected to the projector when [DISABLE] is selected for[DHCP]�DNS (PRIMARY) �����������Set your primary DNS settings of the network connected to the projector�DNS (SECONDARY) ������Set your secondary DNS settings of the network connected to the projector�UPDATE ������������������������Reflect your settings�NOTE: Close the browser after clicking [UPDATE]. The projector will automatically update your set-tings.TIP: Selecting [NETWORK SETTINGS] for [RESET] from the projector’s menu allows you to return the following items to the fac-tory default.[DHCP]: DISABLE[IP ADDRESS]: 192.168.0.10[SUBNET MASK]: 255.255.255.0[DEFAULT GATEWAY]: 192.168.0.1* [DNS(PRIMARY)] and [DNS(SECONDARY)] will remain unchanged.414. Convenient FeaturesDownloaded From projector-manual.com NEC Manuals
