172. Installation and ConnectionsConnecting Your DVD Player with Component OutputTIP: A component signal will be automatically displayed. If not, from the menu, select [SETUP] → [OPTIONS(1)] → [SIGNAL SE-LECT] → [COMPUTER 1 (or 2)] → [COMPONENT]. (→ page 71)• When connecting to the COMPUTER 2 IN, use a commercially available RCA (female)-to-BNC(male) adapter.NOTE: Refer to your DVD player’s owner’s manual for more information about your DVD player’s video output requirements.• Select the source name for its appropriate input connector after turning on the projector.Input connector SOURCE button on the projectorcabinet Button on the remote controlCOMPUTER 1 IN COMPUTER 1 (COMPUTER 1)COMPUTER 2 IN COMPUTER 2 (COMPUTER 2)AUDIO INL RAUDIO OUTL RComponentY Cb CrAUDIO INCOMPUTER 1 INStereo mini plug - to - RCAaudio cable (not supplied)15-pin - to - RCA (female) × 3cable adapter (ADP-CV1E)Component video RCA × 3cable (not supplied)DVD playerAudio EquipmentDownloaded From projector-manual.com NEC Manuals
