16AUDIOINAUDIO OUTPHONEMONITOR OUTCOMPUTER 1 IN2. Installation and ConnectionsConnecting an External MonitorYou can connect a separate, external monitor to your projector to simultaneously view on a monitor the RGB ana-log or component image you’re projecting.NOTE:• Daisy chain connection is not possible.• The MONITOR OUT connector will output no video signal (Digital signal) from the COMPUTER 3 (DVI-D) IN connector.• When audio equipment is connected, the projector speaker is disabled.• When the projector is in standby condition, the MONITOR OUT connector outputs the video signal and the AUDIO OUT jackoutputs the audio signal according to the setting of [OUT TERMINAL] in the menu.Choices are [LAST], [COMPUTER1], and [COMPUTER2].(→ page 73)VGA signal cable (supplied)Stereo mini-plug audio cable(not supplied)Stereo mini-plug audio cable(not supplied)VGA signal cable (not supplied)(or COMPUTER 2 IN / COMPONENT IN)Downloaded From projector-manual.com NEC Manuals
