18AUDIO INL RAUDIO OUTL RVIDEO OUTS-VIDEO VIDEOS-VIDEO IN VIDEO INAUDIO IN2. Installation and ConnectionsConnecting Your VCRS-Video cable (not supplied)Video cable (not supplied)VCRAudio equipmentAudio cable (not supplied)TIP: You can connect a video cable to the “G/Y” connector of the COMPUTER 2 IN (BNC) connectors to display a VCR source. Todo so, from the menu, select [SETUP] → [OPTIONS(1)] → [SIGNAL SELECT] → [COMPUTER 2] → [VIDEO]. (→ page 71)• Select the source name for its appropriate input connector after turning on the projector.Input connector SOURCE button on the projectorcabinet Button on the remote controlVIDEO IN VIDEO (VIDEO)S-VIDEO IN S-VIDEO (S-VIDEO)NOTE: The AUDIO IN L and R jacks (RCA) are shared between the Video and S-Video inputs.NOTE: Refer to your VCR owner’s manual for more information about your equipment’s video output requirements.NOTE: An image may not be displayed correctly when a Video or S-Video source is played back in fast-forward or fast-rewind viaa scan converter.Downloaded From projector-manual.com NEC Manuals
