Lenovo ThinkSystem SR665 V3 User Manual

Also see for 7D9A: System configuration guide User guide

1. Turn off the server.2. Reseat the SAS/SATA adapter.3. Reseat the backplane signal cable and backplane power cable.4. Reseat the drive.5. Power on the server and observe the activity of the drive LEDs.U.3 NVMe drive can be detected in NVMe connection, but cannot be detected in Tri-modeIn Tri-mode, NVMe drives are connected via a PCIe x1 link to the controller. To support Tri-mode with U.3NVMe drives, U.3 x1 mode must be enabled for the selected drive slots on the backplane through the XCCWeb GUI. By default, the backplane setting is U.2 x4 mode.Complete the following steps to enable U.3 x1 mode:1. Log into the XCC Web GUI, and choose Storage ➙ Detail from the navigation tree on the left.2. In the window that is displayed, click the icon next to Backplane.3. In the dialog box that is displayed, select the target drive slots and click Apply.4. Do a DC power cycle to make the setting take effect.514 ThinkSystem SR665 V3 User Guide

/ 540

Related manuals for Lenovo 7D9A

Lenovo ThinkSystem D3 User Manual

Lenovo ThinkSystem DM Series Installation Instructions Manual

Lenovo 7893 Quick Start Instructions

This manual is suitable for:

7D9A 7D9B ThinkSystem SR665 V3

Lenovo ThinkSystem SR665 V3 User Manual

Product

Learn More

Legal