Lenovo ThinkSystem SR665 V3 User Manual

Also see for 7D9A: System configuration guide User guide

• Make sure that all internal cables are correctly routed. See Chapter 6 “Internal cable routing” on page 281.• Handle the top cover carefully. Dropping the top cover with the cover latch open might damage the coverlatch.ProcedureFigure 247. Installing the top coverStep 1. Ensure that the cover latch is in the open position. Lower the top cover onto the chassis until bothsides of the top cover engage with the guides on both sides of the chassis. Then, slide the topcover to the front of the chassis.Note: Before you slide the top cover forward, ensure that all the tabs on the top cover engage withthe chassis correctly.Step 2. Rotate the cover latch until the top cover snaps into position. Ensure that the cover latch iscompletely closed.Step 3. Use a screwdriver to turn the cover lock to the locked position.Demo videoWatch the procedure on YouTubeComplete the parts replacementGo through the checklist to complete parts replacementTo complete the parts replacement, do the following:1. Ensure that all components have been reassembled correctly and that no tools or loose screws are leftinside your server.Chapter 5. Hardware replacement procedures 279

/ 540

Related manuals for Lenovo 7D9A

Lenovo ThinkSystem D3 User Manual

Lenovo ThinkSystem DM Series Installation Instructions Manual

Lenovo 7893 Quick Start Instructions

This manual is suitable for:

7D9A 7D9B ThinkSystem SR665 V3

Lenovo ThinkSystem SR665 V3 User Manual

Product

Learn More

Legal