Menu
Lenovo ThinkSystem SR665 V3 User Manual
Also see for 7D9A: System configuration guideUser guide
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
Figure 115. Installing the memory modulea. Gently open the retaining clip on each end of the memory module slot.b. Align the memory module with the slot, and gently place the memory module on the slotwith both hands.c. Firmly press both ends of the memory module straight down into the slot until the retainingclips snap into the locked position.After you finishComplete the parts replacement. See “Complete the parts replacement” on page 279.Demo videoWatch the procedure on YouTubeManagement NIC adapter replacementFollow instructions in this section to remove and install the ThinkSystem V3 Management NIC Adapter Kit(management NIC adapter).Note: If the ThinkSystem V3 Management NIC Adapter Kit (management NIC adapter) is installed on theserver, it will not be displayed on the PCIe card list of system management software, such as XCC, LXPM,and so on.• “Remove the management NIC adapter” on page 156• “Install the management NIC adapter” on page 158Remove the management NIC adapterFollow instructions in this section to remove the management NIC adapter.About this taskAttention:156 ThinkSystem SR665 V3 User Guide |
Related manuals for Lenovo 7D9A
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved