• “CFF 8i/16i RAID/HBA adapter” on page 318• “Riser 5 + OCP interposer cards + 8i/16i RAID/HBA adapter” on page 320• “Riser 3/4/5 + 8i/16i RAID/HBA adapter + Retimer card” on page 3218i/16i RAID/HBA adapterThe following shows the cable connections for the 8 x 2.5-inch AnyBay configuration with one 8i/16i RAID/HBA adapter.To connect the processor interconnection cable when two processors are installed, see “Processorinterconnection cable routing” on page 311.Connections between connectors: 1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ nSAS/SATA cable routingFigure 300. SAS/SATA cable routing to 8i/16i RAID/HBA adapterFrom To1 Backplane 1: SAS 1 8i/16i adapter• Gen 4: C0• Gen 3: C0C1Chapter 6. Internal cable routing 317