Onboard connectors + 8i RAID/HBA adapter + Retimer cardThe following shows the cable connections for the front (8 x 2.5-inch AnyBay + 8 x 2.5-inch NVMe)configuration with one 8i RAID/HBA adapter and one retimer card.To connect the processor interconnection cable when two processors are installed, see “Processorinterconnection cable routing” on page 311.Connections between connectors: 1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ nSAS/SATA cable routingFigure 370. SAS/SATA cable routing to 8i adapterFrom To1 Backplane 1: SAS 1 8i adapter• Gen 4: C0• Gen 3: C0C1Chapter 6. Internal cable routing 361