Commissioning instructions160 4188-856_issue 7_07/15_Generic Vigilon (Compact + VA) Comms.Appendix D - Guidelines for Networked system commandsMaster Groups¨ There can be up to a maximum of 8 Master Groups per network.¨ These are a collection of Groups used for:• selective fire and non fire event message routing within a Control Panel or around a Networkof Panels• and for routing Global Controls ‘Silence Alarms, Sound Alarms and/or Reset’ to designatedControl Panels in a Network.¨ Messages can be displayed or printed on Control Panels and Repeat Panels. Messages are routedon a Card by Card basis, ie:Card 0 = Panel LCDCard 15 on Vigilon panel (Card 0 on Vigilon Compact panel) = Panel PrinterCards 1-6 = Repeats and Mimics panels on Loops 1-6• Each Card can be configured to display/print All Events (default) or just Fire Events.Repeat Panels on the same loop will always give the same information." Once message passing has been setup for global repeat or mimicindication, the local panel will also have to route reset messages to othergroups, besides Group 0.¨ Groups within different Control Panels can be assigned to the sameMaster Group¨ Global controls can be configured to output/input or both.¨ Messages and controls within a standalone system do not require anysetting up¨ the Group 0 contains all panel events and fire resets and therefore mustalways be assigned to a Master Group." The Verify control button is applicable for EN panels only canoperate globally, like the Sound alarms, Silence alarms and Reset buttons.MASTER GROUP 1MASTER GROUP 2MASTER GROUP 3MASTER GROUP 4MASTER GROUP 5MASTER GROUP 6MASTER GROUP 7MASTER GROUP 8RESETSILENCEALARMSBOTHMCC / MCBCARD 0RESETINPUTLINKBOTH SILENCEALARMSOUTPUTPANEL 1 PANEL 2
