55www.gateway.comViewing the display on a projector or monitorViewing the display on aprojector or monitorYou can use your notebook for giving presentations by connecting anexternal monitor or projector to your monitor (VGA) port. Your notebooksupports simultaneous LCD and CRT display. Simultaneous display letsyou control the presentation from your notebook and at the same timeface your audience.To use a projector or external monitor:1 Turn off your notebook.2 Plug the projector or monitor cable into the VGA port on yournotebook. For the location of the VGA port, see “Back” on page 13.3 Turn on your notebook.4 Plug the projector’s or monitor’s power cord into an AC power sourceand turn it on. Windows recognizes the new hardware and searchesfor its driver. You may need to install the driver from the discsupplied by the manufacturer or download the driver from themanufacturer’s Web site.5 After the driver is installed, right-click any empty space on thedesktop, then click Properties. The Display Properties dialog boxopens.
