101www.gateway.comTroubleshootingTo free IRQ resources for the new device:1 In the Device Manager window, check the device list for aresource conflict. A resource conflict appears as a blackexclamation point in a yellow circle.2 Remove the device you are trying to install, then determinewhich one of the existing devices or ports you can disable.3 Right-click the device or port you want to disable, then clickDisable. The device or port is disabled.Diskette driveThe diskette drive is not recognized■ Shut down and restart your notebook.■ The modular drive may not be inserted completely into the modularbay. Press the module into the bay, then try to access the disketteagain.You see an “Access Denied” or “Write protect” error message■ Move the write-protection tab in the upper-right corner of thediskette down (unprotected).■ The diskette may be full. Delete unnecessary files on the diskette andtry again.■ Not all diskettes are IBM-compatible. Make sure that the diskette youare using is IBM-compatible.■ Try a different diskette. Occasionally diskettes are flawed and cannotbe read by the diskette drive.Help andSupportFor more information about IRQs, click Start, then clickHelp and Support. Type the keyword IRQs in the Searchbox , then click the arrow.
