Canon iPF685 Series Basic Manual

Also see for image Prograf iPF 685 Series: Setup guide User guide

Contents

Canon iPF685 Series Basic Manual Manual pdf 83 page image

4 Press ▲ or ▼ to select Adjust Printer, and then press the OK button.5 Press ▲ or ▼ to select Feed Priority, and then press the OK button.6 Press ▲ or ▼ to select Adjust Length, and then press the OK button.7 Press ▲ or ▼ to select AdjustmentPrint or Change Settings, andthen press the OK button.When you select AdjustmentPrint, a test pattern is printed for youto measure the scale and calculate the discrepancy. The scale barprints Millimeter in 50 mm increments and Inch in 1-inch incre-ments.Note• A test pattern is printed in black when you choose A:High or in magenta if you choose B:Standard/Draft.• To cancel printing the test pattern for adjustment, hold down the Stop button. When "Stop printing?" isdisplayed, press ▲ or ▼ to select Yes, and then press the OK button.8 Press ▲ or ▼ to enter the amount of discrepancy, and then press the OK button.If the scale is shorter than the actual size, use a positive setting value. If it is longer, use a negative value.The feed amount can be adjusted in 0.02% increments.iPF685 Series Adjusting Line LengthBasic GuideAdjustments for Better Print Quality Adjusting the feed amount83