Canon iPF685 Series Basic Manual

Also see for image Prograf iPF 685 Series: Setup guide User guide

Contents

Canon iPF685 Series Basic Manual Manual pdf 107 page image

Printed colors of lines are inaccurate during HP-GL/2 printingPrinted colors of lines are inaccurate during HP-GL/2 printingCause Corrective ActionAdjustFaintLines is On in the Con-trol Panel menu.Setting AdjustFaintLines to Off in the Control Panel menu may help produce the expectedresults. However, lines in some colors may appear broken.HP-GL/2 jobs are printed 6 mm larger than specifiedHP-GL/2 jobs are printed 6 mm larger than specifiedCause Corrective ActionThe page size of the HP-GL/2 print job, as created in the source application, isincorrect.In the Control Panel menu, set Oversize to Off.(See "Menu Settings.") ➔ User's GuideHP-GL/2 jobs are printed at maximum size, even if a standard size is specifiedHP-GL/2 jobs are printed at maximum size, even if a standard size is specifiedCause Corrective ActionThe page size of the HP-GL/2 print job, as created inthe source application, is incorrect.Set Detect img size to Command priority or Detected size in the ControlPanel menu.(See "Menu Settings.") ➔ User's GuideSet Conserve Paper to On in the Control Panel menu.(See "Menu Settings.") ➔ User's GuideHP-GL/2 printing takes a long timeHP-GL/2 printing takes a long timeCause Corrective ActionLarge print jobs with a lot of data take longer to print. Please wait a while until printing is finished.A job was printed when Input Resolution in the Con-trol Panel menu was set to 600dpi.In the Control Panel menu, set Input Resolution to 300dpi and printagain.(See "Menu Settings.") ➔ User's GuideThe printer stops when printing a HP-GL/2 job (the carriage stops moving)The printer stops when printing a HP-GL/2 job (the carriage stops moving)Cause Corrective ActionThe printer is analyzing the print job. Please wait a while until printing is finished.A job was printed when Input Resolution in the Con-trol Panel menu was set to 600dpi.In the Control Panel menu, set Input Resolution to 300dpi and print again.(See "Menu Settings.") ➔ User's GuideiPF685 Series Printed colors of lines are inaccurate during HP-GL/2 printingBasic GuideTroubleshooting HP-GL/2 problems107