4-34Setting Up ServiceSet up the services to be performed in the schedules.To open the settings screen for each service, in the“Service” tab in the Schedule Setting screen, select theservice you want to set up, select a setting number andclick “Detail”.There are 5 types of services you can set up.● Timer: Performs picture recording at each specified time and records them in the device(→ P.4-35).● Motion Detection: Where there is a variation in a part of a picture by the movement of anobject, the device performs picture recording (→ P.4-37).● Night Mode: Takes shots in dark conditions (→ P.4-48).● External Input: Sets camera operation for external device input (→ P.4-50).● External Output: Sets the output time to external devices and the repetition interval etc.(→ P.4-52).Note● Once the services have been set, click the “Save Settings” button on the ScheduleSettings screen to save the settings, and close the settings screen.● You can also start up each of the service setting screens from the toolbar (→ P.4-23). In such case, select a setting number in each service setting screen.Schedule Setting Tool“Service tab” in the Schedule Setting screenSelect the service you want tomake settings for, select asetting number and click the“Detail” button.
