7-4MessageExplanationResponse●A007 View restriction setting error (warning)inconsistent view restriction for camera[1]The view restriction settings are corrupted. The camera control functionson the affected camera cannot be used.Restore the factory default settings or reset the view restrictions.Log MessagesClassificationcriterrFault SeverityCritical fault at the software level (stops task operation)Fault involving a malfunction (operation interrupted)LevelErrorErrorwarningnoticeinfoFault not involving malfunctionFault outside the systemInformation on correct operationWarningWarningInformationMessageExplanation●A001 Camera server startup failure (crit)no %1 installedCapture and initialization of protocols has failed, and the camera serverhas failed to start.%1 sources | protocolsResponse If rebooting does not solve this problem, there is a malfunction. Contact anauthorized Canon service representative.Message●A002 Protocol initialization failure (err)%1 protocol not installed%1 Protocol type (LS/C | LS/D | LS/H)Explanation Initialization of WebView has failed. The setting information may be corrupted.Response Correct the settings or return to factory-shipped settings.■ Camera Server-related Log MessagesThe VB-C50Fi Log MessagesThe Syslog log messages are classified into the following 5 categories. Classification details aredealt with in the UNIX syslog.
