4-10Setting View RestrictionsYou can set up a view restriction by either entering a value in the view restriction setting input boxor by using the following 2 methods. Select the way which suits your environment or according toyour preference.■ Changing Settings from the View Restriction Preview FrameThe View Restriction Preview frame can be used to set view restrictions.○ ○ ○ ○ ○ ○To Make Settings...1. Select “Apply the view restriction”.View Restriction Tool2. Set the view restrictions by using the mouseto move or change the shape of the“Telephoto Preview Frame (yellow)”, and“Wide-angle Preview Frame (green)” .When enlarging or reducing the Telephoto Previewand Wide-angle Preview frames, the vertical:horizontalratio is fixed.At this point, you can also enter and set values in theView Restriction Value Input boxes.3. Click the “Apply” button.Check the Status List to be sure the values wereapplied correctly. Then when the ”Save Settings”button is clicked, the values will be saved to the VB-C50Fi.
