7-18Sample Network ConfigurationsThis section describes some typical installation modes for the VB-C50Fi.Be sure to assign an IP address to the VB-C50Fi that matches your environment.This example shows the VB-C50Fi connected to a LAN by Ethernet. In this configuration, videoscan be seen by viewers in the same Ethernet segment as the VB-C50Fi and by viewers withaccess to that segment.Sample Configuration in an ISP EnvironmentThis example shows an environment in which the VB-C50Fi is connected to an ISP (Internet serviceprovider). In this configuration, videos can be seen by viewers capable of accessing the ISP.Bidirectional communication is required between the VB-C50Fi and the ISP, and a fixed IP addressmust be set for the VB-C50Fi (→ P.5-26).Sample LAN Environment ConfigurationRouter RouterVB-C50FiViewer PCViewer PCServerProvide the appropriateserver as required:● HTTP (WWW)InternetRouterModemRouterClient receivingimagesServer sendingimages VB-C50FiViewer PCViewer PCServers Provide the appropriateserver as required:● HTTP (WWW)ISDN/leased line/ADSL, etcAnalog lineISDN/leased line/ADSL, etc
