3-9Basic SettingsCamera Control1234Setting Camera Control, Image Size and Quality (Camera and Video)53 “Interlace Mode”Select either “Weave (Interlace)” (for subjects which move a little) or “Bob (Non-Interlace)” (forsubjects which move a lot), according to the range of the movement.You can obtain high-resolution video if you set “Video Capture Size” to “Large Size”. Howeverif the subjects move quickly and sharply, you may encounter comb-shaped blurs in the video.“Bob” is more effective for quickly moving subjects.4 “Use External Video Input”You can use an external video input connected to the Multi-Terminal Module (VB-EX50) withthe switching method (→ P.1-10).1 “Shutter Speed”Sets the camera shutter speed.2 “Focus Mode”Sets the focusing mode for the camera.Select the focusing mode for the camera from “Auto” (for auto focus), “Auto (for domes)” (forthe camera used in combination with a camera dome so that auto focus does not focus on thecamera dome wall surface) or “Fixed at infinity” (for focusing on infinity).* “Auto (for domes)” and “Fixed at infinity” is not available if you configure the Night Mode settings (→ P.4-65).NoteIf dust or rain adheres to the dome, focusing may occur on the dome wall. Pleaseplace the dome wall and the camera as closely together as possible when using.
