2-6Turning the Power ON and OFFThe VB-C50Fi itself does not have a power switch. You can switch the VB-C50Fi on by pluggingthe AC adapter into a wall outlet. The LED flashes when the VB-C50Fi is communicating. Whenthe power supply is turned ON, the LED momentarily flashes.Note● Wait at least 5 seconds before turning the power back on after shutting it off. Turningit on too quickly may result in a malfunction. Observe the precautions given in “aSafe Use of Equipment/a IMPORTANT SAFETY INSTRUCTIONS” (→ P.xii).● If the picture recording function is being used, shutting off the power orrestarting the VB-C50Fi will cause all pictures to be deleted.2. Connect the Camera to the NetworkNext, connect the camera. Connect the camera to the network by connecting the camera and PCvia the hub with a LAN cable .* Do not plug the AC cable powerplug into the wall socket yet.PCHubLAN cableAC cableAC adapter(Rear of main unit)00008501F162○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○The network connection is now complete.AC cableto AC outletAC adapterMain unit
