7-19AppendixUpgrading the Firmware RemotelyNoteDo not turn the power off until you have confirmed that the VB-C50Fi has restarted.Turning the power off before completion may prevent it from starting up properly.Get the new firmware from the WebView Product web site (http://www.canon.com/webview), andupgrade in command prompt. The firmware file is called “Firmware_new.bin” and is saved on yourPC in “My Documents”.1. Open command prompt.C:\Documents and Settings\xxxx> is displayed on the screen.2. Specify the folder containing the firmware.Enter: C:\Documents and Settings\xxxx>cd My Documents3. Use the ftp command and connect to the VB-C50Fi.Enter: C:\Documents and Settings\xxxx\My Documents>ftp 192.168.100.14. Enter Administrator account and password.Enter: User (192.168.100.1: (none)): rootPassword: VB-C50i* Enter the password you are actually using. For more details about changing passwords,please refer to “Setting up the Administrator Passwords and Ethernet etc.” (→ P.3-5).5. Change to binary mode.Enter: ftp> binary6. Send the firmware to the VB-C50Fi.Enter: ftp> put Firmware_new.bin flash7. Transmission begins.It normally takes 1-2 minutes to complete transmission.8. Notification of completion.“The system upgraded completed successfully” is displayed.9. Log out of the VB-C50Fi and close command prompt.Enter: ftp> byeC:\Documents and Settings\xxxx\My Documents> exitTip● The underlined portion is a sample IP address. Enter the actual IP address thatwas set on the VB-C50Fi (→ P.3-6).● The user name you are using is displayed in “xxxx” (Windows 2000/XP only).
