2-7Setting UpOnce your PC and the camera are connected, perform the initial settings next. The instructionshere follow on from “2. Connect the Camera to the Network”, where one camera is connected toa PC as an example.3. Perform Initial Settings for the CameraNoteDo not turn on the camera at this stage.○ ○ ○ ○ ○ ○ ○ ○ ○Continued on the following page. aSupplied CD-ROMD70-0066-01Ver. 1.0 J/EWindowsisaregisteredtrademarkofMicrosoftCorporat ioni nt h eU . S . a n d o t h e r c ount r ies.CopyrightCANONINC.2004AllRightsReserved.MadeinJapan.1. Turn on the network device (in this case, the hub) and then your PC.2. Insert the CD-ROM provided into your PC and from Explorer etc. double-click“VBSetup.exe” to start the VB Initial Setup Tool. Turn on the VB-C50Fi.LAN cableVB-C50FiHubInstallation Example
